The super flex temple tips are made of superior resin that is soft, comfortable, and secure when worn.
(SF7005, SF7018, SF7101, SF2020 and SF2021 only)

Hold endpieces and slide bridge to maximum open position before wearing.
(SF7005, SF8008, SF8015 and SF9003 only)

The temples of the Slimfold Ultra have been developed incorporating a unique locking hinge mechanism.
The hinges lock automatically when the temples are opened. This ensures the frame remains horizontally level without twisting whilst being worn on the face.

The soft nose pads are fixed onto spring toggle wires enabling an adjustable and comfortable fit on the bridge of the nose.
(SF7018, SF7101, SF8008S, SF8015S, SF2020 and SF2021 only)

The length of the temples can be shortened to suit individual face measurements by cutting the metal side core in steps of 4mm. To do this, first remove the screw seated in the plastic temple tips and gently pull off the tips. Using a wire cutter snip off the desired length and replace the plastic tip aligning the screw hole. Replace the screw and tighten.
(SF7005, SF7018, SF7101, SF2020 and SF2021 only)

The Slimfold Ultra frame when not being worn should only be stored in the case provided as no other design of case can function. The design and mechanism enables the spectacle frame to fold and collapse into the case very neatly.

	When the lid is opened by depressing the latch the temple positions are restored to the original state and the spectacles are ready for removal from the case. To store the spectacles in the case, simply push down the case lid until it latches to close.
	Open the temples. The hinges lock automatically.
	Hold endpieces and slide bridge to maximum open position.